Brother 882-W02, 882-W01 operation manual Button Sewing, 131, Raise the presser foot

SEWING THE STITCHES

Button Sewing

Buttons with 2 or 4 holes can be attached, using the machine.

		Presser		Stitch width		Stitch length		Twin
Stitch	Stitch name		Applications	[mm (inch)]		[mm (inch)]
		foot						needle
				Auto	Manual	Auto	Manual
	Button sewing		Attaching buttons	3.5	2.5 - 4.5
						—	—	NO
				(1/8)	(3/32 - 3/16)

Note

•Do not use the automatic thread cutting function when sewing buttons. Otherwise, you will lose the thread ends.

3

aSelect .

￿The feed dogs are lowered automatically.

bRaise the presser foot.

cAttach button sewing foot “M”, slide the button along the metal plate and into the presser foot, and lower the presser foot.

aButton

bMetal plate

dRotate the handwheel toward you (counterclockwise) to check that the needle goes into each hole correctly.

* If the needle does not reach the holes on the left

side, adjust the stitch width.

*To attach the button more securely, repeat the process.

eGently hold the end of the upper thread and start sewing.

￿The machine stops automatically when sewing is finished.

CAUTION

•Make sure the needle does not strike the button during sewing. The needle may break and cause injury.

fFrom the wrong side of the fabric, pull the end of the bobbin thread to pull the upper thread through to the wrong side of the fabric. Tie the two thread ends together and cut the threads.

Utility Stitches

gAfter the button is attached, select another stitch and rotate the handwheel toward you (counterclockwise) to raise the feed dogs.

131