Manuals / Brother / Household Appliance / Sewing Machine

Brother 882-W02, 882-W01 operation manual 337

Models: 882-W01 882-W02

1 376

Download 376 pages 39.41 Kb

Page 351

This message is displayed when a key on the LCD display is touched while the needle is in the down position.

This message is displayed when there are too many characters and the curved character configuration is impossible.

This message is displayed when the machine is in embroidery mode, and the character pattern combination is too large to fit in the embroidery frame.

This message is displayed when the machine is in embroidery mode and the combined character pattern is too large for the embroidery frame. You can rotate the pattern 90 degrees and continue combining characters.

ERROR MESSAGES

This message is displayed when the machine is in embroidery mode and the embroidery unit tries to initialize while the embroidery frame is attached.

This message is displayed when the machine is ready to sew an embroidery pattern, and the “Start/Stop” button is pushed while the embroidery frame is not attached.

This message is displayed when the machine is in embroidery edit mode, and you try to use an editing function when the pattern is not completely within the red outline.

This message is displayed when you try to save a copyright protected pattern to USB media/Computer. According to copyright laws, patterns that are illegal to reproduce or edit cannot be saved to USB media or computer. If this message displays, save the pattern in the machine’s memory.

This message is displayed when the machine is in embroidery mode and the small frame is attached, and the selected pattern does not fit in the small frame.

This message appears when embroidery frame (small) is attached while aligning the embroidery position using the built-in camera.

8

Appendix

337

Image 351

Brother 882-W02, 882-W01 operation manual 337

Contents

Computerized Embroidery and Sewing Machine Trademarks Read Before DOWNLOADING, COPYING, Installing or UsingIntroduction Important Safety Instructions8For repair or adjustment For Users in the UK, EIRE, Malta Cyprus only Important Safety Instructions Label location Checking the Needle Location in the Screen Edge Sewing Outstanding FeaturesPrint and Stitch Combining the Embroidery and Printing Duplicating a PatternSewing Basics What YOU can do with this MachineHOW to USE this Manual Contents Embroidery 181 Xii Machine Front ViewRight-side/Rear View Presser foot Needle and Presser Foot SectionOperation Buttons Embroidery UnitClosing the Accessory Case Using the Flat Bed AttachmentUsing the Accessory Case Opening the Accessory CaseUsing the Embroidery Unit Carrying Case Included AccessoriesStoring Bobbin Clips 75/11 Part Code SABF6000D OptionsHow to Assemble the Spool Stand Using the Spool StandHow to Remove Getting Ready Turning the Machine ON/OFF Turn the main power switch to O to turn off the machine Turn the main power switch to I to turn on the machineHome Page Screen LCD ScreenUtility Stitch LCD Screen D e U t J k l Key FunctionsPresser foot/Needle USB Connectivity Using a USB Mouse Connecting the Machine to the ComputerChanging Pages Clicking a KeyLCD Screen Sewing settings Using the Machine Setting Mode KeyGeneral settings Embroidery settings Press Changing the Pointer Shape When a USB Mouse Is UsedDisplay 3/7 page 3 of 7 of the General settings screen Changing the Screen Saver ImageSewing settings screen appears GPress to select the first image HSelect the device that is connectedIPress a file name to select image and then Press to return to the original screen Selecting the Initial Screen DisplayEPress to return to the original screen Choosing the Display LanguageChanging the Background Colors of the Embroidery Patterns Press to return to the original screen Select the background color from the 66 settings availableUsing the Sewing Machine Help Key Using the Operation Guide Function Using the Sewing Guide Function Read the instructionsEnterpage. Utility Stitch category from the home Press Using the Pattern Explanation Function APressRead the explanations and select the appropriate stitch Screen shows information Using the Supplemental Spool Pin Lower ThreadingWinding the Bobbin Setposition.the supplemental spool pin in the up Guide slit with built-in cutter Bobbin winder seat Using the Spool Pin Using the Spool Stand Pass the thread through the thread guideHFollowthroughsteps40. g through k on Untangling Thread from Beneath the Bobbin Winder Seat Press Slide the bobbin cover latch to the right Setting the BobbinCutter Cutter cuts the thread Replace the bobbin cover Pulling Up the Bobbin ThreadUpper Threading Upper ThreadingPress the Needle Position button to raise the needle Look in the upper groove area Needle bar thread guide Using the Twin Needle Mode Press and install the twin needle Changing the Needle on KPress to select the twin needle mode IPress Select a stitch pattern. ExampleStart sewing When using thread on a cone spool, use the spool holder Using the Spool Net Using Threads that Unwind QuicklyRaise the presser foot lever Changing the Presser FootRemoving the Presser Foot Attaching the Presser FootMemo Attaching the Walking FootChanging the Needle Press to unlock all keys and buttons Fabric/Thread/Needle Combinations About the NeedleSewing Basics Lower the presser foot Install the presser foot Changing the Presser Foot onSewing Sewing a StitchAdjust the sewing speed with the speed control slide Using the Foot ControllerSewing Curves Sewing Reinforcement StitchesIf the Fabric does not Fit under the Presser Foot Sewing Heavyweight FabricsChanging Sewing Direction Sewing a Seam Allowance of 0.5 cm or LessSewing Lightweight Fabrics Sewing Hook-and-Loop FastenerIf the Fabric does not Feed Sewing Stretch Fabrics Setting the Stitch Width Stitch SettingsSetting the Stitch Length Setting the Thread TensionProper Thread Tension Upper Thread is Too Loose Upper Thread is Too TightUseful Functions Automatic Reinforcement StitchingSelect a stitch pattern Setsewing.the fabric in the start position and start Automatic Thread CuttingUsing the Knee Lifter Pivoting Select a stitch BPress to select the pivot settingCPress to return to the original screen Rotate the fabric, and then press the Start/ Stop buttonLocking the Screen Needle Position Stitch PlacementSew your project Checking the Needle Location in the ScreenUseful Functions Utility Stitches Stitch Selection Screens Selecting Utility StitchesUsing the Mirror Image Key Selecting a StitchBUse to select the category you want Press to go back to the original screen Using the Image KeySaving Settings Saving Your Stitch SettingsSelect a stitch Retrieving Saved SettingsStraight Stitches Sewing the StitchesPressforward.the Start/Stop button to sew Select a stitch Attach presser foot JExample Left/Middle needle position stitches Grasp the bobbin case, and then pull it out Or pressBasting JInsertfoot. needle and attach the straight stitchSew while keeping the fabric straight Selectfoot J.a straight stitch and attach presser Dart SeamGathering ASelect and attach presser foot JFlat Fell Seam Spread the fabric out along the finish lineGSew on the seam line and remove Basting stitch Iron the folds in the same direction PintuckOvercasting Using a Zigzag Stitch Appliqué Using a Zigzag StitchZigzag Stitches Remove the bobbin cover from the machine see Sewing Curves Using a Zigzag StitchCord Guide Bobbin Cover Using a Zigzag Stitch Patchwork for Crazy QuiltElastic Zigzag Stitches Tape AttachingOvercasting Overcasting Overcasting Using Presser Foot GOvercasting Using Presser Foot J Overcasting Using the Side Cutter Notch in presser foot holder Pin Side cutter is attached Lower the presser foot and start When Sewing Straight Stitches While Using the Side CutterZigzag stitch Left Quilting100 Sewing the Stitches 101ASelect or and attach presser foot J 102Piecing QuiltingAppliqué 103Quilting with Satin Stitches 104BSelect or Using Free motion Quilting Foot C105 Free Motion QuiltingPress to set the machine to free motion sewing mode 106DRemove55. the presser foot holder see HPress to cancel the free motion sewing mode Using free motion Open Toe Quilting Foot O107 Echo Quilting Using the Free Motion Echo Quilting Foot E GPressmode. to cancel the free motion sewing108 109 ASelect Press to set the machine to free motion sewing mode110 HPress to cancel the free motion sewing modeBlind Hem Stitches 111Turn the skirt or pants wrong side out Attach blind hem foot R GSelect or 112If the Needle does not Catch the Hem Fold Appliqué113 If the Needle Catches Too Much of the Hem FoldAppliqué Corners Shelltuck Stitches114 Appliqué Sharp CurvesScallop Stitches 115Trim along the seam, making sure not to cut the stitches Crazy Quilting Smocking Stitches116 HPull out the straight stitch threads FagotingTape or Elastic Attaching 117Pull out the straight stitch threads 118ESelect or Sew over the tape or elasticHemstitching 2 Drawn Work Heirloom119 Hemstitching 1 Daisy StitchHemstitching 3 Drawn Work 120121 One-step Buttonholes122 123 124 Sewing Stretch FabricsLower the presser foot and start sewing 125 Four-step Buttonholes126 Darning 127128 129 Bar Tacks130 Bar Tacks on Thick FabricsGently hold the end of the upper thread and begin sewing Gently hold the end of the upper thread and start sewing Button Sewing131 Raise the presser footPullsewing.the shank lever toward you before 132Attaching 4 Hole Buttons Attaching a Shank to the Button133 Eyelet134 Multi-directional Sewing Straight Stitch and Zigzag StitchBSelect and attach monogramming foot N Zipper Insertion 135Centered Zipper Inserting a Side Zipper 136Set the presser foot in the 3 mm approx /8 inch margin 137138 Edge Sewing139 BAttachV. the vertical stitch alignment footPeel off the transparent sheet of the edge sewing sheet EPress 140141 When the Built-In Camera Can Detect the Edge of the Fabric142 When the Fabric Edge Indicator Line Does Not Appear143 Example When a straight stitch is selectedPress 144Character/Decorative Stitches 146 Selecting Stitch Patterns7mm Satin Stitch Patterns Cross Stitch 147Press , or to select a font Cross Stitch/Utility Decorative Stitch PatternsAlphabet Characters 148149 CPress Then enter B EPressDPress and then enter lue FPress again and enter S Adjusting the Character Spacing 150Deleting Characters 151 BPress to adjust character spacing152 Sewing Stitch PatternsSewing Attractive Finishes Basic SewingMaking Adjustments 153APress Select On 16/16 154 Sew the stitch pattern againFPress to return to the original screen 155 Editing Stitch Patterns156 Actual Stitch Pattern Size Changing the SizeCreating a Vertical Mirror Image 157158 Creating a Horizontal Mirror ImageSewing a Pattern Continuously Changing Thread Density For Satin Stitch Patterns OnlyReturning to the Beginning of the Pattern 159Press the Start/Stop button to stop Machine, and then press Checking the Image 160Press to display the enlarged image Press to return to the original screen 161162 Combining Stitch PatternsBefore Combining Combining Various Stitch Patterns163 164 Combining Large and Small Stitch Patterns165 Combining Horizontal MirrorImage Stitch Patterns Combining Stitch Patterns of Different LengthBSelect again, then press 3 times 166DPress 167Press BPress CPress again EPressMore Examples 168Using the Memory Function Stitch Data Precautions169 Trademarks 170171 Saving Stitch Patterns in the Machine’s Memory172 If the Memory is FullChoose a stitch pattern to delete 173 174 Saving Stitch Patterns to USB Media175 Saving Stitch Patterns in the Computer176 Retrieving Stitch Patterns from the Machine’s MemoryRecalling from USB Media 177Choose a stitch pattern to retrieve 178 179 Recalling from the Computer180 Embroidery Before Embroidering Embroidery Step by Step182 183 Attaching Embroidery Foot WHPress to unlock all keys and buttons Attaching the Embroidery Unit184 About the Embroidery UnitRemoving the Embroidery Unit Turn the main power to onTurn the main power to OFF 185Selecting Patterns 186Copyright Information Pattern Selection Screens 187188 Press the key of the pattern you want to embroider 189190 Selecting Alphabet Character PatternsDPress and then enter B 191Selecting Frame Patterns 192HPress and then enter ky Press the key of the frame pattern you want to embroider 193Selecting Patterns from Embroidery Cards 194Followpattern.the steps on page 189 to select a 195 Selecting Patterns from USB Media/Computer196 Viewing the Sewing ScreenKey Functions 197198 Preparing the Fabric199 Hooping the Fabric in the Embroidery Frame 200Types of Embroidery Frames Inserting the Fabric 201Remove the embroidery sheet Using the Embroidery SheetReturn the frame adjustment screw to its initial position 202Embroidering Edges or Corners Embroidering Small Fabrics or Fabric Edges203 Embroidering Small FabricsAttaching the Embroidery Frame 204With the holder’s Removing the Embroidery Frame 205206 Confirming the Pattern PositionAfter selecting the pattern, press Then press 207Following message appears. Press 208Press Press the Start/Stop button to begin embroidering Checking the Pattern Position209 Fabric, and pressPreviewing the Completed Pattern 210That you want to check BPress to select the frame used in the preview 211212 Sewing AN Embroidery PatternSewing Embroidery Patterns 213Embroidery Needle Plate Cover Press the Start/Stop button to start embroidering 214Sewing Embroidery Patterns Which Use Appliqué 215Press the Start/Stop button 216217 Using iron-on paper Using printable fabricSelecting a Pattern 218Checking Only the Embroidery Pattern 219 Using USB Media220 Using a USB CablePrint the background image 221After checking that a pattern is selected Press 222Cut the paper printed with the center Image on the fabric223 If the Bobbin Runs Out of Thread224 If the Thread Breaks During SewingResuming Embroidery After Turning Off the Power Restarting from the Beginning225 226 Attach the embroidery frame and pressContinue embroidering Correct Thread Tension Making Embroidery AdjustmentsAdjusting Thread Tension 227Correct Tension 228Bobbin Thread is Too Tight Using the Automatic Thread Cutting Function229 Bobbin Thread is Too Loose230 Selecting the Length of Jump Stitch Not to TrimPress BPress to turn off the thread trimming function To change the maximum embroidery speed Adjusting the Embroidery SpeedChanging the Thread Color Display 231DWhen the thread number #123 is Changing the Embroidery Frame Display232 233 Revising the Pattern Changing the Pattern Position234 235 Aligning the Pattern and the NeedleAPress BSelectsize. the direction in which to change 236Press EUse On the fabric, and begin embroidering the patternRotating the Pattern 237APress Select the angle of rotation for the pattern 238 Creating a Horizontal Mirror Image239 APress Change the densityCPress to return to the pattern selection screen Changing the Colors of Alphabet Character Patterns 240APress so that it appears as Embroidering Linked Characters 241Select the character patterns for ABC As in step a, select the character patterns for DEF Press 242MUse 243Embroidery Data Precautions 244Types of Embroidery Data that can be Used Tajima .dst Embroidery Data 245246 Saving Embroidery Patterns in the Machine’s MemorySelect the pattern you want to delete 247248 249 Saving Embroidery Patterns to USB Media250 Saving Embroidery Patterns in the Computer251 Retrieving Patterns from the Machine’s MemoryCPress 252Pressretrieve.the key of the pattern you want to 253Pressrecall.the key of the pattern you want to 254FPress 255Using a Frame Pattern to Make an Appliqué Embroidery Applications256 257 258 Sewing Split Embroidery Patterns 259BSelect section to be embroidered If necessary, edit the pattern 260Embroidery Edit 262 Explanation of Functions263 Selecting Patterns to EditProceed to Editing Patterns on page 267 to edit the pattern 264CPress to change the layout of the pattern 265Select the font, then enter the characters. Example a B C D Select the layout. ExampleAfter you finish your selections, press 266267 Editing PatternsF g L k 268269 Moving the Pattern270 Changing the Size of the PatternChanging the Configuration Alphabet Character Patterns Deleting the Pattern271 Changing Alphabet Character Spacing 272Press the key of the layout you want to embroider Reducing Character Spacing 273BUse to change the spacing APress BPress Use to select where the pattern isSeparating Combined Character Patterns 274275 Use to select a pattern, Then useSpacing BIn the sewing screen, press Press 276277 Changing the Thread Color 278Pattern editing screen, press Creating a Custom Thread Table 279CPress to choose a new color from the color palette Add a color on the custom thread table 280EPress 281GPress to return to the original screen 282Color from the custom thread table 283Designing Repeated Patterns 284Sewing Repeated Patterns 285 Adjust the spacing of the repeated pattern286 Repeating One Element of a Repeated PatternBUse and to select the cut line Color Sorting Repeated Patterns 287288 Sewn 289Assigning Thread Marks APress BPress CPress290 After EditingPattern BUse to view 2/7, then select Press Combining PatternsEditing Combined Patterns 291292 Press Press to enter the alphabet charactersFSelect and enter Spring IPress to change the layout Characters. Press KWhen all editing is finished, press293 Selecting combined embroidery pat- ternsBEmbroider Sewing Combined Patterns294 Color order on the right side of the display295 Press , and then display 7/7 of the settings screenVarious Embroidering Functions Basting EmbroideryCreating an Appliqué Piece Screen DPress EPress to select the basting settingCreating an Appliqué Piece 296297 Select the pattern, and edit it if necessaryScreen EPress 298 FPress to select the appliqué settingApplique Material 299300 Using a Frame Pattern for the Out- lineHPress 301After selecting the pattern, press Then press 302Press 303Fabric and press 304305 Using the Memory Function306 Using iron-on paper Using printable fabric307 Selecting a Pattern308 Using USB Media309 Using a USB CablePrint the background image 310Positioned aligned with the background image on the fabric 311312 MY Custom Stitch Decide the spacing of the stitch Designing a Stitch314 Draw the stitch design on the grid sheet part code SA507Examples of Custom Stitches 315316 Entering Stitch DataPress to add the point indicated by 317FUse To move 318APress or to move to the point that you want to move 319Moving a Point Moving Part or All of the Design320 Inserting New PointsCPress or to move the section 321 Using Stored Custom Stitches Storing Custom Stitches in Your List322 Retrieving Stored Stitches 323Select the stitch pattern 324 335 329Cleaning the Race Care and MaintenanceCleaning the LCD Screen Cleaning the Machine Casing327 Cleaning the Cutter in the Bobbin Case Area328 About the Maintenance Message329 Adjusting the ScreenTurn the main power to OFF, then turn it back to on Touch Panel is Malfunctioning330 Troubleshooting331 332 Chart333 334 335 Error Messages336 337 This message is displayed 338339 340 341 342 Alarm Sounds343 SpecificationsUpgrade Procedure Using USB Media Upgrading Your MACHINE’S Software344 Remove the USB media, and turn the machine off and on again Upgrade Procedure Using ComputerCopy the upgrade file to Removable Disk 345When the message disappears, press 346Unplug the USB cable, and turn the machine off and on again 347 Stitch Setting Chart348 Stippling 349350 351 352 353 354 355 356 IndexMY Custom Stitch 357358 SettingsPage Page