Brother 882-W01, 882-W02 operation manual Before Embroidering, Embroidery Step by Step, 182

BEFORE EMBROIDERING

BEFORE EMBROIDERING

Embroidery Step by Step

Follow the steps below to prepare the machine for embroidery.

Step 9

Step 6, 8

Step 3

Step 4

	Step 1, 2
		Step 7	Step 5
Step #	Aim		Action	Page
1	Presser foot attachment	Attach embroidery foot “W”.		183
2	Checking the needle	Use needle 75/11 for embroidery. *		58
3	Embroidery unit attachment	Attach the embroidery unit.		184
4	Bobbin thread setup	For the bobbin thread, wind embroidery bobbin thread and set it in place.		37
5	Fabric preparation	Attach a stabilizer material to the fabric, and hoop it in the embroidery frame.		198
6	Pattern selection	Turn the main power to ON, and select an embroidery pattern.		186
7	Embroidery frame attachment	Attach the embroidery frame to the embroidery unit.		204
8	Checking the layout	Check and adjust the size and position of the embroidery.		206
9	Embroidery thread setup	Set up embroidery thread according to the pattern.		46

*It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example; denim, puffy foam, etc.). Ball point needle (golden colored) 90/14 is not recommended for embroidery.

182