Brother 882-W02 Scallop Stitches, 115, Trim along the seam, making sure not to cut the stitches

SEWING THE STITCHES

dAttach presser foot “J”. Set the needle drop point slightly off the edge of the fabric, and start sewing.

aNeedle drop position

eUnfoldside. the fabric, and iron the tucks to one

Memo

•To make shell tucks at the edge of a collar or neckline, follow the pattern’s instructions and then use this stitch to make a decorative finish on the collar or neckline.

Scallop Stitches

This wave-shaped satin stitch is called the scallop stitch. Use this stitch to decorate the edges of blouse collars and handkerchiefs or use it as a hem accent.

Memo

•A temporary spray adhesive may be neces- sary for lightweight fabrics. Test sew

the fabric before sewing a project.

aSelect .

Memo

•For details on each stitch, refer to the “STITCH SETTING CHART” at the end of this manual.

bAttach presser foot “N”. Sew scallop stitches along the edge of the fabric.

* Do not sew directly on the edge of the fabric.

cTrim along the seam, making sure not to cut the stitches.

Memo

•Use a seam sealant to secure the edges of the scallop stitches.

3

Utility Stitches

115