Brother 882-W01, 882-W02 operation manual 306, Using iron-on paper Using printable fabric

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS)

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS)

Completed embroidery patterns combined with printed designs are built into this machine.

Beautiful three-dimensional embroidered designs can be created by ironing a background onto fabric or printing it onto printable fabric, then sewing complementary embroidery on top of the background.

Using iron-on paper

Using printable fabric

Step1

Select a pattern to be combined with the background image.

￿See “Selecting a Pattern” on page 307.

Step2

Output from the machine the background image and the positioning image.

￿See “Outputting the Background Image and Positioning Image” on page 308.

Step3

When using iron-on paper

With a printer, print the background onto iron-on paper, and print the embroidery position sheet on plain paper. Then, iron the background image onto fabric.

When using printable fabric

With a printer, print the background onto printable fabric, and print the embroidery position sheet on plain paper.

￿See “Printing the Background and Embroidery Position Sheet” on page 310.

Step4

Hoop in the embroidery frame the fabric with the background image ironed on or printed, check the embroidering position, and then start embroidering.

￿See “Sewing Embroidery Patterns” on page 310.

Note

•Print the background and embroidery position sheet in their original dimensions. If an image is printed in a different size, the sizes of the embroidery pattern and background may not match. In addition, the built-in camera cannot detect the embroidery position mark. Make sure that the print settings are correctly specified.

306