331

TROUBLESHOOTING

Problem	Cause	Solution	Page
Bobbin thread breaks	Bobbin is set incorrectly.	Reset the bobbin thread correctly.	43

	There are scratches on the bobbin or it doesn’t	Replace the bobbin.	43
	rotate properly.

	Thread is twisted.	Use scissors, etc. to cut the twisted thread	—
		and remove it from the race, etc.

	A bobbin designed specifically for this machine	Incorrect bobbins will not work properly. Only	43
	is not used.	use a bobbin designed specifically for this
		machine.

Bobbin thread does	The thread is not passed through the bobbin	Correctly pass the thread through the bobbin	38
not wind neatly on the	winding thread guide correctly.	winding thread guide.
bobbin.
bobbin.	Bobbin spins slowly.	Press [+] in the bobbin winding window to	39
	Bobbin spins slowly.	Press [+] in the bobbin winding window to	39
		increase the bobbin winding speed.

	The thread that was pulled out was not wound	Wind the thread that was pulled off around the	39
	onto the bobbin correctly.	bobbin 5 or 6 times clockwise.

Skipped stitches	Needle is turned, bent or the point is dull.	Replace the needle.	56

	Using improper needle or thread for the	Check the “Fabric/Thread/Needle	58
	selected fabric.	Combination” chart.

	Machine is threaded incorrectly.	Check the steps for threading the machine	46
		and rethread it correctly.

	Dust or lint has collected under the needle plate.	Remove the dust or lint with the brush.	326

	Needle is installed incorrectly.	Reinstall the needle correctly.	56

	Needle is defective.	Replace the needle.	56

	Thin or stretch fabrics are being sewn.	Sew with one sheet of thin paper under the	64
		fabric.

Needle breaks	Needle is installed incorrectly.	Reinstall the needle correctly.	56

	Needle clamp screw is not tightened.	Tighten the needle clamp screw.	57

	Needle is turned or bent.	Replace the needle.	56

	Using improper needle or thread for the	Check the “Fabric/Thread/Needle	58
	selected fabric.	Combination” chart.

	Wrong presser foot was used.	Use the recommended presser foot.	“STITCH SETTING
			CHART”

	Upper thread tension is too strong.	Adjust the thread tension setting.	67, 227

	Fabric is pulled during sewing.	Do not pull the fabric during sewing.	—

	Spool cap is set incorrectly.	Check the method for attaching the spool cap,	46
		then reattach the spool cap.

	There are scratches around the holes in the	Replace the needle plate, or consult your	86
	needle plate.	authorized dealer.

	There are scratches around the hole(s) in the	Replace the presser foot, or consult your	54
	presser foot.	authorized dealer.

	There are scratches on the race.	Replace the race, or consult your authorized	326
		dealer.

	Needle is defective.	Replace the needle.	56

	Upper threading is incorrect.	Check the steps for threading the machine	46
		and rethread the machine.

	Bobbin is set incorrectly.	Reset the bobbin thread correctly.	43

	Presser foot is attached incorrectly.	Attach the presser foot correctly.	54

	Screw of the presser foot holder is loose.	Securely tighten the screw of the presser foot.	55

	Fabric is too thick.	Use fabric that the needle can pierce when	63
		the handwheel is turned.

	Fabric is fed forcefully when sewing thick fabric	Allow the fabric to be fed without being
	or thick seams.	forcefully pushed.

	Stitch length is too short.	Adjust the stitch length.	67

	Stabilizer is not attached to fabric being	Attach stabilizer.	152, 198
	embroidered.

	Bobbin thread is incorrectly wound.	Use a correctly wound bobbin.	37

Appendix

331 882-W01, 882-W02 specifications

The Brother 882-W02 and 882-W01 are two prominent models in the world of innovative sewing machines, designed to cater to both beginners and experienced sewists alike. These machines are part of Brother's reputation for producing high-quality, user-friendly sewing equipment, ensuring that crafting enthusiasts achieve their desired results with ease and efficiency.

One of the most notable features of the Brother 882-W02 and 882-W01 is their versatility. Both models come equipped with multiple stitch options, allowing users to choose from a variety of utility and decorative stitches. This flexibility means they can handle a wide range of sewing projects—from simple hemming and seam repairs to more intricate embroidery tasks. The selection of stitches also includes stretch stitches, which are particularly useful for sewing knit fabrics.

In terms of technology, both models incorporate an intuitive LCD display that makes it easy to select stitches and adjust settings. This digital interface is user-friendly, providing a straightforward experience, especially for beginners. The machines also boast automatic needle threading, minimizing the time and frustration often associated with manual threading, ensuring that users can get started on their projects more quickly.

Another impressive characteristic of the Brother 882 series is their robust build quality. Both machines are designed to withstand the rigors of frequent use, featuring durable components that ensure longevity. Moreover, they include a built-in carrying handle, making it convenient to transport the machine to various sewing classes or projects.

The Brother 882-W02 and 882-W01 also prioritize user comfort, with features such as adjustable sewing speed and a free arm for sewing cylindrical items like sleeves and pant legs. This ergonomic design enhances the overall sewing experience, enabling users to craft with greater control and precision.

In conclusion, the Brother 882-W02 and 882-W01 offer a combination of advanced features, intuitive technology, and user-centric design. These sewing machines are ideal for anyone looking to elevate their sewing skills, whether they are starting their journey or seeking a reliable machine for more complex projects. With their versatility and durability, the Brother 882 series stands out as an excellent investment for sewing enthusiasts everywhere.

Brother 882-W02, 882-W01 operation manual 331

Models: 882-W01 882-W02

Problem

fabric.

882-W01, 882-W02 specifications