Brother 882-W01, 882-W02 operation manual Overcasting Using the Side Cutter

SEWING THE STITCHES

■Overcasting Using the Side Cutter

By using the side cutter, you can do overcasting while cutting the fabric.

CAUTION

•Recommended stitches are noted “S” in the lower right corner, therefore sure to only select one of these stitches listed below. Using another stitch may cause the needle to hit the presser foot and break, possibly causing injury.

Note

•Thread the needle manually when using the side cutter, or only attach the side cutter after threading the needle using the “Automatic Threading” button.

		Presser		Stitch width		Stitch length		Twin
Stitch	Stitch name		Applications	[mm (inch)]		[mm (inch)]
		foot						needle
				Auto	Manual	Auto	Manual
	With side cutter		Straight stitch while cutting	0.0	0.0 - 2.5	2.5	0.2 - 5.0
			fabrics					NO
				(0)	(0 - 3/32)	(3/32)	(1/64 - 3/16)
	With side cutter		Zigzag stitch while cutting fabrics	3.5	3.5 - 5.0	1.4	0.0 - 4.0
								NO
				(1/8)	(1/8 - 3/16)	(1/16)	(0 - 3/16)
	With side cutter		Overcasting stitch while cutting	3.5	3.5 - 5.0	2.0	1.0 - 4.0
			fabrics					NO
				(1/8)	(1/8 - 3/16)	(1/16)	(1/16 - 3/16)
	With side cutter		Overcasting stitch while cutting	5.0	3.5 - 5.0	2.5	1.0 - 4.0
			fabrics					NO
				(3/16)	(1/8 - 3/16)	(3/32)	(1/16 - 3/16)
	With side cutter		Overcasting stitch while cutting	5.0	3.5 - 5.0	2.5	1.0 - 4.0
			fabrics					NO
				(3/16)	(1/8 - 3/16)	(3/32)	(1/16 - 3/16)

aSelect a stitch.

bFollow the steps on page 54 to remove the presser foot.

cThread the needle (see page 46).

dPosition the fork on the side cutter’s operating lever onto the needle clamp screw.

aNeedle clamp screw

bOperating lever

Memo

•Make sure that the fork of the operating lever is set onto the needle screw firmly.

96