Brother 882-W01, 882-W02 operation manual 214, Press the Start/Stop button to start embroidering

SEWING AN EMBROIDERY PATTERN

bLower the presser foot, then press the “Start/Stop” button to start embroidering. After 5-6 stitches, press the “Start/Stop” button again to stop the machine.

cTrim the excess thread at the end of the seam. If the end of the seam is under the presser foot, raise the presser foot, then trim the excess thread.

dPress the “Start/Stop” button to start embroidering.

￿When the first color is completely sewn, the machine will automatically trim the threads and stop. The presser foot will then automatically be raised.

On the embroidery color order display, the next color will move to the top.

Memo

•If there is thread left over from the beginning of sewing, it may be sewn over as you con- tinue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the threads at the beginning of each thread change.

eRemove the thread for the first color from the machine. Thread the machine with the next color.

fRepeat the same steps for embroidering the remaining colors.

￿When the last color is sewn, “Finished sewing” will

appear on the display. Press , and the display will return to the original screen.

Memo

•The Thread Trimming Function is originally set to trim excess thread jumps (threads linking parts of the pattern, etc.). Depending on the type of thread and fabric that are used, an end of upper thread may remain on the surface of the fabric at the beginning of the stitching. After embroidering is finished, cut off this excess thread.

*If the setting has been turned off, trim the excess thread jumps using scissors after the pattern is finished.

See page 230 for information on the thread trimming function.

214