Brother 882-W01, 882-W02 operation manual 300, Using a Frame Pattern for the Out- line

VARIOUS EMBROIDERING FUNCTIONS

nWith the machine threaded using the thread for the outline from step l, sew the outline (APPLIQUE).

aOutline of appliqué piece

Memo

•The outline is sewn using satin stitching.

•Some glue may get onto the presser foot, needle, and needle plate at this time. Finish embroidering the appliqué pattern, and then clean off the glue.

oAfter embroidering is finished, remove the stabilizer material from the embroidery frame.

pUse scissors to cut the excess water-soluble stabilizer from outside the appliqué outline.

qSoak the appliqué piece in water to dissolve the water-soluble stabilizer.

rDrynecessary.the appliqué piece, and then iron it if

Note

•Do not apply a strong force when ironing, otherwise the stitching may be damaged.

■Using a Frame Pattern for the Out- line

Using a frame pattern, the desired shape can be added as the outline of the appliqué.

aPerform the operations described in steps a through d of “Creating an Appliqué Piece” on page 296.

bSelect the desired frame shape and pattern, and add it to the appliqué pattern.

300