![The control panel](/images/new-backgrounds/78923/7892311x1.webp)
The control panel
Control lamps
Indicator lamps
A
On/Off button | Water softener |
| button |
Buzzer button
Rinse aid | Programme |
button | buttons |
Combination buttons ”A”
In addition to selecting a programme, you can press these two buttons to adjust the setting of the water softener, switch off the buzzer and rinse aid dispenser.
Indicator lamps:
Shows • Wash cycle in progress | top lamp |
• Rinse cycle in progress | middle lamp |
• Drying in progress | lowest lamp |
Control lamps:
Shows that • Refilling of salt container is necessary
•Refilling of the rinse aid dispenser is necessary
•The selected programme has finished
Switching the buzzer off
Before switching the buzzer off all programmes must have been completed.
1. Press in the On/Off button.
2.Press the combination buttons simultaneously and hold them pressed in. When the first three programme indicator lamps starts to flash, you can let go of the buttons.
3.Press the buzzer button once. The lamp for the buzzer button starts to flash and the lamp for the ended programme cycle is lit. Press the button once more and the lamp for the ended programme cycle goes out. Now the buzzer is off.
4.Press out the On/Off button to complete the setting.
To reset the function, follow steps 1 and 2 above and then press the buzzer button twice, until the end of programme lamp is illuminated again.
- 6 -