TO REPLACE THE OUTER GLASS
1.Open the oven door with care and place in the park position at an angle of approximately 30°.
2.Holding the oven glass with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door.
3.Push the top of the oven glass towards the oven door ensuring the screw location holes line up.
4.Ensure the trim is correctly positioned on the top oven / grill door.
5.Hold the glass in place at the top of the door. Insert the cross head screws into the location holes. Give the screws one turn to ensure the glass is secure.
6.Tighten the screws positively with the Pozidrive screwdriver before closing the oven door.
Do not attempt to use the oven without the glass being in place.
REPLACING AN OVEN LIGHT BULB
The type of bulb required is a 300°C 25 watt small Edison Screw. Part number 572 491
CAUTION: DISCONNECT THE APPLIANCE FROM THE ELECTRICITY SUPPLY BEFORE REPLACING THE BULB.
Open the door and remove the shelves to enable easy access to the oven light assembly. Insert a flat blade screwdriver between the oven side and glass which covers the bulb.
Support the glass with your hand and prise out sufficiently to release the glass cover. Unscrew the bulb in an anticlockwise direction until it is possible to remove the bulb with ease.
Fit the new bulb by turning in a clockwise direction until it is secure. Ensuring the indent to the flange is pointing to the rear of the oven, replace the glass by pushing it firmly into the hole to cover the bulb assembly.
Replace the shelves. Restore the electricity supply and adjust the time of day and clock as necessary.
37
