Do not open the door during the countdown to pre- vent interruption of the countdown. When you close the door again, the countdown continues from the point
of interruption.
Cancelling a delay start:
1.Press and hold the start/cancel button until, the start/ cancel indicator light and delay start indicator light go off.
2.Press the start/cancel button to start the washing programme.
End of the washing programme
Switch off the appliance in these conditions:
•The appliance stops automatically.
•The end indicator light comes on.
For better drying results, keep the door ajar for some mi- nutes before you remove the dishes.
Let the dishes cool down before you remove them from the appliance. Hot dishes are easily damaged.
Removing the load
•First remove items from the lower basket, then from the upper basket.
•There can be water on the sides and door of the appli- ance. Stainless steel becomes cool more quickly than the dishes.
Care and cleaning
Warning! Switch the appliance off before you clean the filters.
Cleaning the filters
Important! Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance.
12
Fully clean the filters A, B and C below running wa- ter.
3 | 4 |
To remove filters B and C, | Remove the flat filter A |
turn the handle approxi- | from the bottom of the ap- |
mately 1/4 anticlockwise. | pliance. |
5
Put the filter system in po- sition. To lock the filter system, turn the handle clockwise until it locks in position.
Important! Do not remove the spray arms.
If the holes in the spray arms become clogged, remove remaining parts of soil with a cocktail stick.
11
