Programme

Duration (in minutes)

Energy (in kWh)

Quick 65° A 30'

30

0,8

Economy 50°

120 - 130

0,8 - 0,9

Prewash

11

0,1

The pressure and temperature of the water, the var- iations of power supply and the quantity of dishes

can change these values.

Water (in litres)

8

12 - 13

5

Use of the appliance

Refer to the following instructions for each step of pro- cedure:

1.Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener.

2.Fill the salt container with dishwasher salt.

3.Fill the rinse aid dispenser with rinse aid.

4.Load cutlery and dishes into the dishwasher.

5.Set the correct washing programme for the type of load and soil.

6.Fill the detergent dispenser with the correct quantity of detergent.

7.Start the washing programme.

If you use detergent tablets, refer to the chapter 'Use of detergent'.

Setting the water softener

The water softener removes minerals and salts from the water supply. Minerals and salts can have bad effect on the operation of the appliance.

Water hardness is measured in equivalent scales:

German degrees (dH°).

French degrees (°TH).

mmol/l (millimol per litre - international unit for the hardness of water).

Clarke.

Adjust the water softener to the water hardness in your area. If necessary, contact your local water authority.

5

Page 5
Image 5
Zanussi ZDS 2010 user manual Use of the appliance, Setting the water softener, Quick 65 a Economy 120 0,9 Prewash