Zanussi ZDS 2010 Use of dishwasher salt, Manual adjustment, Electronic adjustment, Water hardness

Water hardness

°dH	°TH	mmol/l	Clarke
51 - 70	91 - 125	9,1 - 12,5	64 - 88
43 - 50	76 - 90	7,6 - 9,0	53 - 63
37 - 42	65 - 75	6,5 - 7,5	46 - 52
29 - 36	51 - 64	5,1 - 6,4	36 - 45
23 - 28	40 - 50	4,0 - 5,0	28 - 35
19 - 22	33 - 39	3,3 - 3,9	23 - 27
15 - 18	26 - 32	2,6 - 3,2	18 - 22
11 - 14	19 - 25	1,9 - 2,5	13 - 17
4 - 10	7 - 18	0,7 - 1,8	5 - 12
< 4	< 7	< 0,7	< 5

1) No use of salt required.

Water hardness setting

manually	electronically
2	10
2	9
2	8
2	7
2	6
2	5
1	4
1	3
1	2
11)	11)

You must set the water softener manually and elec- tronically.

Manual adjustment

The appliance is set at the factory at position 2.

12

Set switch to position 1 or 2.

Electronic adjustment

The water softener is set at the factory at level 5.

Use of dishwasher salt

1.Press and hold the start/cancel button. Turn the pro- gramme knob clockwise until the programme marker agrees with the first washing programme on the con- trol panel.

2.Release the start/cancel button when the on/off indi- cator light and the start/cancel indicator light start to flash.

–At the same time, the end-of-programme indicator light flashes to show the level of the water softener.

Example:

5 flashes, pause, 5 flashes, pause, etc. = level 5

3.Press the start/cancel button one time to increase the water softener level by one step.

The end-of-programme indicator light shows the new level.

4.Turn the programme knob to the off position to save the operation.

Caution! Only use dishwashers salt. Types of salt that are not applicable for dishwashers cause

damage to the water softener.

6