The cleaning results are not satisfactory
The dishes are not clean | • The selected washing programme is not applicable for the type of load and | |
|
| soil. |
| • The baskets are loaded incorrectly so that water cannot reach all surfaces. | |
| • Spray arms do not turn freely because of incorrect arrangement of the load. | |
| • | The filters are dirty or not correctly installed. |
| • | The quantity of detergent is too little or missing. |
Limescales particles on the dishes | • The salt container is empty. | |
| • The water softener is adjusted on a wrong level. | |
| • The salt container cap is not closed correctly. | |
The dishes are wet and dull | • No rinse aid has been used. | |
| • The rinse aid dispenser is empty. | |
There are streaks, milky spots or | • Decrease the rinse aid dosage. | |
a bluish coating on glasses and |
|
|
dishes |
|
|
Dry water drop signs on glasses | • Increase rinse aid dosage. | |
and dishes | • The detergent can be the cause. | |
Technical data
Dimensions
Electrical connection - Voltage - Overall power - Fuse
Water supply pressure
Capacity
Width cm | 59,6 |
Height cm | |
Depth cm | 55,5 |
|
|
Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door.
Minimum | 0,5 bar (0,05 | MPa) |
Maximum | 8 bar (0,8 | MPa) |
Place settings |
| 12 |
|
|
|
Environment concerns
The symbol 
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Discard the packaging materials in the applicable container at the community waste disposal facilities.
13
