Zanussi ZDT41 manual Electrical connection

Models: ZDT41

1 16
Download 16 pages 57.27 Kb
Page 15
Image 15
Electrical connection

34

The internal diameter must not be smaller than the diam- eter of the hose.

If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a block- age in the drain hose spigot.

Caution! Make sure that the water couplings are tight to prevent water leakage.

Electrical connection

Warning! The manufacturer is not responsible if you do not follow these safety precautions.

Ground the appliance according to safety precautions. Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.

Always use a correctly installed shockproof socket. Do not use multi-way plugs, connectors and extension cables. There is a risk of fire.

Do not replace the mains cable yourself. Contact the Service Force Centre.

Make sure that the mains plug is accessible after installation.

Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

Warning! The appliance is supplied with a 13 amp plug attached. Use a 13 amp ASTA approved (BS

1362) fuse if it is necessary to change the fuse in the plug supplied.

15

Page 15
Image 15
Zanussi ZDT41 manual Electrical connection