M

A

X

 

1

 

 

+

2

3

4

 

 

34

Fill when the rinse aid in- dicator ( B ) becomes clear.

M

A

X

1

 

 

+

2

3

4

 

 

5

Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). This can cause damage to the appli-

ance.

Adjusting the dosage of rinse aid

 

 

 

 

 

The rinse aid dial is set at

 

 

 

 

 

the factory at position 3.

 

 

 

 

 

To increase or decrease

M

A

X

 

the dosage refer to 'What

 

 

to do if...'

1

2

3

4

+

 

 

 

 

 

Loading cutlery and dishes

Helpful hints and tips

Caution! Only use the appliance for household utensils that are applicable for dishwashers.

Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.).

Before you load cutlery and dishes, do these steps:

Remove all food remainings and debris.

Make burnt, remaining food in pans soft.

While you load cutlery and dishes, do these steps:

Load hollow items (e.g. cups, glasses and pans) with the opening down.

Make sure that water does not collect in the con- tainer or in a deep base.

Make sure that cutlery and dishes do not lie inside one another.

Make sure that cutlery and dishes do not cover other cutlery and dishes.

Make sure that glasses do not touch other glasses.

Put small objects in the cutlery basket.

Plastic items and pans with non-stick coatings can keep water droplets. Plastic items do not dry as well as porcelain and steel items.

Put light items in the upper basket. Make sure that the items do not move.

Caution! Make sure that the spray arms can move freely before you start a washing programme.

Warning! Always close the door after you load or unload the appliance. An open door can be

dangerous.

12

Arrange service dishes and large lids around the edge of the lower basket.

8

Page 8
Image 8
Zanussi ZDT41 manual Loading cutlery and dishes, Adjusting the dosage of rinse aid, Helpful hints and tips