Sharp PG-D45X3D quick start Image Projection, Adjusting the Projected Image Adjusting the Focus

Image Projection

Adjusting the Projected Image

1 Adjusting the Focus

You can adjust the focus with the focus ring on the projector.

Rotate the focus ring to adjust the focus while watching the projected image.

2 Adjusting the Height

The height of the projector can be adjusted using the adjustment feet.

When the screen is above the projector, the projection image can be made higher by adjusting the projector.

1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever.

2Remove your hands from the HEIGHT ADJUST lever of the projector after its height has been finely adjusted.

•The angle of projection is adjustable up to 9 degrees from the surface on which the projector is placed.

Note

•When adjusting the height of the projector, trapezoidal distortion occurs. Follow the procedures in Keystone Correction to correct the distortion. (See pages 28 and 43.)

3 Adjusting the Picture Size

You can adjust the picture size using the zoom ring on the projector.

Rotate the zoom ring to enlarge or shrink the picture size.

Zoom ring

Focus ring

HEIGHT ADJUST lever

Basic

Operation

Make small adjustments.

Info

•Do not apply too much pressure on the projector when the front adjustment feet come out.

•When lowering the projector, be careful not to get your fi ngers caught in the area between the adjustment feet and the projector.

•Hold the projector fi rmly while lifting or carrying.

•Do not hold by the lens area.

27