Observe the following safeguards when setting up your projector.

Caution concerning the lamp unit

Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector

Dealer or Service Center for replacement.

See “Regarding the Lamp” on page 55.

Caution concerning the setup of the projector

For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the vents and lens must be cleaned more often. As long as the projector is regularly cleaned, use in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center.

Rest your eyes occasionally.

Continuously watching the screen for long hours will cause eye strain. Take regular breaks to rest your eyes.

When using the projector in high- altitude areas such as mountains (at altitudes of approximately 1,500 meters (4,900 feet) or more)

When you use the projector in high-altitude areas with thin air, set “Fan Mode” to “High”. Neglecting this can affect the longevity of the optical system.

Use the projector at altitudes of 2,300 meters (7,500 feet) or less.

Warning about placing the projector in a high position

When placing the projector in a high position, make certain it is carefully secure to avoid personal injury caused by the projector falling down.

Do not subject the projector to hard impact and/or vibration.

Protect the lens so as not to hit or damage the surface of the lens.

Avoid locations with extremes of temperature.

The operating temperature of the projector is from 41°F to 95°F (+5°C to +35°C).

The storage temperature of the projector is from –4°F to 140°F (–20°C to +60°C).

Do not set up the projector in places exposed to direct sunlight or bright light.

Position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

Caution regarding placing of the projector

Place the projector on a level site within the adjustment range (9 degrees) of the adjustment foot.

After the projector is purchased, a faint smell from the vent may appear when the power is first turned on. This is normal and is not a malfunction. It will disappear after the projector is used for a while.

Do not block the exhaust and intake vents.

Allow at least 11 13/16 inches (30 cm) of space between the exhaust vent and the nearest wall or obstruction.

Ensure that the intake vent and the exhaust vent are not obstructed.

If the cooling fan becomes obstructed, a protection circuit will automatically put the projector into Standby mode to prevent overheat damage. This does not indicate a malfunction. (See pages 53 and 54.) Remove the projector power cord from the wall outlet and wait at least 10 minutes. Place the projector where the intake and exhaust vents are not blocked, plug the power cord back in and turn on the projector. This will return the projector to the normal operating condition.

8

Page 12
Image 12
Sharp PG-D45X3D quick start Rest your eyes occasionally, Avoid locations with extremes of temperature

PG-D45X3D specifications

The Sharp PG-D45X3D is a state-of-the-art 3D capable projector, designed to deliver an exceptional viewing experience for both home and professional environments. This projector stands out due to its ability to present 3D content with clarity and vibrant colors, making it an outstanding choice for those who wish to enjoy immersive multimedia experiences.

One of the main features of the PG-D45X3D is its impressive brightness level, providing up to 4500 ANSI lumens. This brightness ensures that images remain visible and clear even in well-lit rooms, which is essential for both presentations and movie viewing. The projector also boasts a native resolution of 1024 x 768 (XGA), which allows for sharp and detailed image reproduction, making it suitable for a wide range of content, from educational presentations to cinematic experiences.

The PG-D45X3D employs DLP (Digital Light Processing) technology, known for its reliability and high-quality images. This technology enables the projector to deliver deep blacks and bright whites, ensuring a dynamic contrast that enhances the viewing experience. Additionally, the projector supports 3D viewing, allowing users to experience their favorite films and games in a whole new dimension, perfect for gaming enthusiasts and 3D movie lovers alike.

Connectivity options are abundant with the PG-D45X3D. It includes multiple inputs such as HDMI, VGA, and composite video, ensuring compatibility with a wide range of devices, including laptops, Blu-ray players, and gaming consoles. This flexibility allows users to easily connect their devices without the need for additional adapters.

Another notable characteristic of the Sharp PG-D45X3D is its compact design, which makes it easy to transport and set up in various environments. Whether used in classrooms, conference rooms, or home theaters, this projector can adapt seamlessly to its surroundings.

In terms of longevity, the PG-D45X3D features a long-lasting lamp life of up to 4000 hours in standard mode and up to 6000 hours in eco mode. This durability reduces the frequency of lamp replacements, thereby lowering maintenance costs and ensuring uninterrupted use.

In conclusion, the Sharp PG-D45X3D is a versatile, high-performing projector that combines high brightness, advanced DLP technology, and 3D capabilities. Its diverse connectivity options and compact design make it an ideal choice for a wide range of applications, catering to users looking for quality performance and value.