The control panel
In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open.
1.On/Off push button
2.Salt refilling indicator light
3.On/Off indicator light
4.Programme selection push buttons
5.End of cycle indicator light
Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing.
Short "instruction accepted" signal
When any of the push buttons are pressed (except the
On/Off push button), a short audible signal informs you that the machine has accepted the instruction given.
Long "programme run" signal
A continuous audible signal, heard only when you close the door, informs you that the washing programme is starting.
Intermittent "end of programme" signal
An intermittent audible signal informs you that the wash programme has ended.
To deactivate the audible signals, | press simultaneously and | |
keep pressed both | NORMAL 65°c | and BIO 50°c push |
buttons, during the pressure of the push buttons an intermittent audible signal will be heard for about 3 seconds, after this time the audible signal will turn off, this means that the audible signals have been deactivated.
SO234
To reactivate the audible signals, | press simultaneously and | |
keep pressed both | NORMAL 65°c | and BIO 50°c push |
buttons, during the pressure of the push buttons no signal will be heard for about 3 seconds, after this time an intermittent audible signal will start, this means that the audible signals have been reactivated.
Both operations (to deactivate or reactivate the audible signals) must be carried out before starting a washing programme; the setting will remain memorised after switching off the dishwasher.
4