Operating sequence

1. Check the filters

Ensure they are clean and properly positioned (see "Maintenance and cleaning").

2. Press the On/Off push button

The On/Off indicator light comes on.

3.Check that there is rinse aid and salt

4.Load the dishes

Remove any scraps of food.

Pull the lower basket out and arrange the saucepans, plates and cutlery in it.

Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. in it.

Slide the baskets back into the machine.

5.Ensure that the spray arms can rotate freely

6.Measure out detergent

Add the required amount of detergent according to the dosage quantity given in the "Washing programmes" chart.

Close the detergent dispenser lid.

7. Set the programme

The selection of the programme occurs with the open door.

Press the programme push button which corresponds to the washing programme you wish to select, the corresponding indicator light will flash.

If you want to change washing programme, simply press another programme push button.

8. Start the programme

Close the door.

An audible signal advises you that the programme has started.

The indicator light which corresponds to the programme under way is now permanently on.

9. At the end of the washing programme

The dishwasher will automatically stop and an audible signal informs you that the programme has ended.

The "end of cycle" indicator light flashes.

The On/Off indicator light remains on until the On/Off push button is depressed.

Wait until the end of the audible signal before opening the door.

10. Switch off the dishwasher

Open the door and switch off the dishwasher by pressing the On/Off push button.

Wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

11. Cancel a programme

To change a programme in progress, open the door and press the push button of the programme under way for more then 1 second, until the corresponding indicator light goes out.

The dishwasher is now reset and you can select a new programme.

Important!

In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops.

Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

4

Page 3 Page 5
Page 4
Image 4
Zanussi ZDT 6252 manual Operating sequence
Page 3 Page 5

ZDT 6252 specifications

The Zanussi ZDT 6252 is a versatile and efficient built-in dishwasher designed to meet the needs of modern households while ensuring a seamless integration with kitchen decor. This model is known for its reliability, user-friendly features, and superior cleaning performance, making it a popular choice among consumers.

One of the standout features of the Zanussi ZDT 6252 is its spacious interior, capable of accommodating up to 13 place settings. This ample capacity allows users to tackle large loads, making it perfect for families and those who frequently entertain guests. The adjustable upper basket is designed to offer flexibility, enabling users to easily make room for larger pots and pans without compromising on space for other dishes.

The dishwasher boasts a range of wash programs tailored to different cleaning needs. With multiple settings including Eco, Intensive, and Quick Wash, users can choose the most suitable option based on their dishwashing requirements. The Quick Wash option is especially beneficial for busy households, providing a speedy yet effective cleaning cycle, perfect for those unexpected gatherings.

In terms of energy efficiency, the Zanussi ZDT 6252 performs admirably, typically rated at A++ or higher. This level of efficiency not only helps reduce energy consumption, but it also leads to lower utility bills over time. The advanced water-sensor technology used in this model optimizes water usage by adjusting the amount needed depending on the load size, further enhancing its eco-friendly credentials.

Another significant feature is the ActiveDry technology, which ensures that the dishwasher door opens automatically in the drying cycle, allowing fresh air to flow in and promoting thorough drying of the dishes. This innovative feature helps eliminate moisture and enhances drying performance, minimizing the need for manual towel drying.

Quiet operation is another hallmark of the Zanussi ZDT 6252, typically operating at around 44 dB, ensuring minimal disruption in the home while the dishwasher is running. This level of quietness makes it suitable for open-plan living spaces where noise can be a concern.

Overall, the Zanussi ZDT 6252 integrates practicality, efficiency, and advanced cleaning technology, making it an exceptional choice for anyone in search of a reliable built-in dishwasher. Its combination of smart features and user-friendly design allows consumers to enjoy a hassle-free dishwashing experience, ensuring sparkling clean results with every cycle.
Top Page Image Contents