Changing the opening direction of the door
Unplug the appliance before performing the following operations:
Remove the ventilation grille
Unscrew the bottom hinge
Remove the screws of the bracket with foot (I) and levelling foot (H) and reassemble them on the opposite side (Fig. 3).
Remove the door from the upper pivot
Remove the pivot and the washer
Screw down the bottom hinge
Detach the plug
Insert the plug (G), which is supplied with the appliance, into the hole left free on the opposite side.
Reverse the direction of the handle (Fig. 6).
Changing the opening direction of the compartment door (Fig. 7)
Remove pin (1).
Remove the door. Pin (4) could drop out when this operation is carried out; if so, it must be retrieved for fitting on the opposite side.
Remove bush (5) and fit it on the opposite side.
Remove the catch (3) and fit it on the opposite side.
Fit pin (4) on the opposite side.
Reposition the door and insert pin (1), pressing it into place.
Warning
After having reversed the opening direction of the door, check that the door gasket is adherent to the cabinet.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
Fig. 3
H
I
D691
Fig. 4
E
F
F
F
D
F
D432
Fig. 5
C |
B |
A |
D427 |
Fig. 6
D162 |
|
|
|
| Fig. 7 |
|
| 4 |
3 |
|
|
| 2 |
|
D164 | 5 | 1 |
|
13