38 | Optional Equipment (for qualified installers only) |
3Follow the directions below to replace the orifices.
bUse a 1/2” open end wrench to unscrew the orifice.
Orifice
Orifice
c
Apply thread sealant to the LP orifices prior to installation. Use the chart below to identify the
a
Slide the air shutter all the way to the left.
Manifold
d
Manifold
1/2" Wrench
correct orifices.
Look here for the orifice identification
LP NG
.0625 #37
Screw the LP orifice in so the orifice shoulder protrudes 5/16” (indicating full insertion).
5/16”
4Remove the pilot orifice following the instructions below. Replace with the propane pilot orifice
a | Lift the pilot hood | |
off the pilot | ||
| ||
| assembly. |
c | Remove the orifice and replace with the LP orifice. Screw the | |
orifice all the way in and replace the pilot hood. | ||
| ||
| Orifice Identification: |
b Use a hex wrench to unscrew the orifice.
5/32" Hex
NOTE: when
35
LP (Propane) Orifice
35
NG (Natural Gas) Orifice
62
© Travis Industries | 4060111 |