Avalon Stoves DVS Insert EF II Installation, for qualified installers only, Face Sizing, 4060111

	Installation		(for qualified installers only)		11
Face Sizing
	Face	Height	Width	Notes
	Rawhide	22-1/2”	32”
	Victorian	22-1/2”	32”
	Rosario	21-9/16”	32”
	Cambridge	21-1/2”	33”
	Craftsman	21-1/2”	32”
	Classic Arched, Artisan	22”	30”	Side begins arch 3-1/2” below top - 34” radius
	Metropolitan	22”	30”
	Architectural Series	22-3/4”	29-7/8”
	Discovery	21-9/16”	32”
	Bedford	22-3/4”	34-1/8”	Requires the Bedford DVS EF II Face Upgrade Kit.
				This lowers the face 1-1/4” - see “Mounting the
				Bedford Face” on the following page.
				2-1/4” Deep, requires 5/8” above for installation

Modifying the Face Connector for Rosario, Discovery, and Artisan Faces

The Rosario and Discovery face attach with screws that insert near the glass frame. To better access these screws, we recommend you re-position the face connector following the directions below. NOTE: The connector can be left in the stock position, but this makes face installation difficult.

Remove the face connector bracket from the heater (on both sides).

Re-attach the face connector to the heater using the forward mounting holes.

Face Connector Bracket

© Travis Industries 4060111 100-01175