Skil Before YOU Assemble this Extension to Model 3400 Table SAW, Extension Installation FIG

TOOLS REQUIRED (FIG. 1)
10 mm Wrench
OR 10 mm Socket
Phillips Screwdriver
	FIG. 1
Adjustable End Wrench
Straight Edge

(MODEL 3400-12 ONLY)

BEFORE YOU ASSEMBLE THIS EXTENSION TO

MODEL 3400 TABLE SAW

Sort out and account for all parts to make sure that you have all necessary materials to assemble your tool extension. Do not discard packing material until all parts are accounted for (Fig. 2).

ITEM	DESCRIPTION	QTY.
1.	Table Extension	1
2.	Hex Head Bolt — 1/4-20 x 1 1/4"	2
3.	Hex Nut — 1/4-20	2
4.	Lockwasher	2
5.	Flat Washer	4
6.	Hex Head Leveling Screw	2
7.	Scale	1

HELPFUL ASSEMBLY HINTS

Assemble nuts and bolts finger tight only until completely assembled as adjustments may be necessary.

! WARNING	This part may have sharp edges. Be careful in
	handling to prevent being cut.

EXTENSION INSTALLATION (FIG. 3)

1.Place extension 1 along desired side of table saw.

2.Place flat washer 5 and hex head bolt 2 through holes at each end of table and extension.

3.Place flat washer 5, lockwasher 4 and hex nut 3 onto hex head bolt as shown. Finger tighten nut.

4.Tighten hardware just enough to allow adjustment of extension.

5.Using a straight edge, adjust extension to be flush with table along top surface and front edge.

6.Tighten nuts securely.

7.Recheck with straight edge.

FIG. 2

1

2

43

5

56

7

2

5	5
FIG. 3		4	1

3

60.