When switching on the mains, after installation or a power cut, it is quite normal for the spark generator to be activated automatically.
In the absence of electricity, ignition can occur without the electrical device; in this case, approach the burner with a flame, push the relevant knob down and turn it
If the control knobs become difficult to turn, please contact your local Service Force Centre.
Using the Wok Stand (only for model ZGF 692 C, ZGF 692 CT)
A wok stand is provided to enable you to use a round bottomed wok on the hob. The wok stand must only be used on the triple crown burner, and should not be used with any other type of wok or pan. When fitting the wok stand, ensure the recesses in the frame fit securely onto the bars of the pan supports, as shown in the picture.
Using the hob correctly
To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a flat bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (see the table below).
Burner | minimum | maximum |
| diameter | diameter |
Triple crown | 180 mm | 260 mm |
Large (rapid) | 180 mm | 260 mm |
Medium | 120 mm | 220 mm |
Small (auxiliary) | 80 mm | 160 mm |
|
|
|
8
