Fitting the Hob into the Worktop
Carry out the building in of the hob as follows:
• place the seals supplied with the |
|
hob on the front edge of the cut |
|
out. Then, place them at 86 mm |
|
from the side edges and at 10 mm |
|
from the rear edge, as shown in |
|
the diagram, taking care that the |
|
seals meet without overlapping. |
|
• place the hob in the cut out, taking |
|
care that it is centred; |
|
• fix the hob with the relevant fixing |
|
clamps, supplied with the |
|
accessories bag, as shown in the |
|
diagram. When the screws have |
|
been tightened, the excess seal |
|
can be removed. |
|
The edge of the hob forms a double seal |
|
which prevents the ingress of liquids. | Seal |
|
20
