Zanussi ZHC605, ZHC705, ZHC905 manual Installation Instructions, Electrical Connections

INSTALLATION INSTRUCTIONS

It is dangerous to alter the specifi cations or attempt to modify this product in any way.
Technical Information
DIMENSIONS	HEIGHT OF CANOPY:			24cm
	HEIGHT OF CHIMNEY:		(UPPER SECTION)	20cm
			(LOWER SECTION)	56cm
	WIDTH OF CANOPY - ZHC 605:			59,8cm
	WIDTH OF CANOPY - ZHC 705:			69,8cm
	WIDTH OF CANOPY - ZHC 905:			89,8cm
	DEPTH OF CANOPY:			49cm
	GROSS - ZHC 605:			16kg
	GROSS - ZHC 705:			16,5kg
	GROSS - ZHC 905:			17,6kg
	NET - ZHC 605:			12,4kg
	NET - ZHC 705:			12,8kg
	NET - ZHC 905:			13,7kg
ELECTRICAL SUPPLY:	VOLTAGE:		220-240 V 50Hz
	POWER CONSUMPTION:			230W
	FAN MOTOR:			150W
	LIGHT BULB:	(2 x 40 W)		80W
SUITABLE FOR INSTALLATION
ABOVE:	ELECTRIC HOB:			7KW (max)
	GAS HOB:			10KW (max)
	SLOT-IN GAS COOKER			13.5KW (max)
	SLOT-IN ELECTRIC COOKER			12.4KW (max)
	Note: CE Marking certifies that this appliance complies with the requirements
	laid down in EEC directive 89:336. (Electromagnetic compatibility) and
	subsequent modifications and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

DOUBLE INSULATED DO NOT EARTH

Electrical Requirements

Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regulations. For your own safety this should be undertaken by a qualifi ed electrician e.g. your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.

This appliance is fi tted with a 3 core mains cable and must be permanently connected to the electricity supply via a double-pole switch having 3mm minimum contact gap on each pole. A Switched Fuse Connection Unit to BS1363 Part 4, fi tted with a 3 Amp fuse, is a recommended mains supply connection accessory to ensure compliance with the Safety Requirements applicable to fi xed wiring instructions.

This appliance conforms to BS 800: 1988 and EEC Directive No. 78 308 regarding suppression of radio and television interference.

10