INSTALLING THE COOKER HOOD

Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown.

All installations must comply with the local authorities requirements for the discharge of exhaust air.

Incorrect installation may affect the safety of this cooker hood.

Installation Requirements

Before installation check the wall to which the cooker hood is to be fi tted for electric cables, water pipes or gas.

This cooker hood is designed to be fi xed to any vertical surface over a cooking area, and can be used in the extraction (ducted to the outside) or recirculation mode.

The installation work must be undertaken by a qualifi ed and competent person.

The manufacturer disclaims any responsibility for damage due to incorrect installation of the cooker hood or if the hood is not installed in compliance with relevant regulations controlling this type of installation.

Unpacking

Before unpacking the cooker hood position the carton with the arrows pointing upwards as illustrated on the carton.

The cooker hood is made up of the following components:

Ref Qty Product Components

11 Hood body, complete with controls, lighting, fan and fi lters.

21 Telescopic Chimney comprising:

2.11 Upper section

2.21 Lower section

91 ø150-120 Ducting spigot

101 ø120-125 Ducting fl ange

151 Air outlet connector

Ref Qty Installation Components

7.12 Hood body fi xing brackets

7.22 Upper chimney wall fi xing brackets

12c

6

Chimney fi xing screws

12d

2

Screws M4x25

Ref

Qty

Documentation

 

1

Instruction booklet

15

2.1

2

2.2

10

9

1

7.2.1

12c

12c

12c

7.1

12d

11

Page 11
Image 11
Zanussi ZHC605, ZHC905 Installing the Cooker Hood, Installation Requirements, Unpacking, Screws M4x25, Instruction booklet