INSTALLING THE COOKER HOOD
Extraction (Ducted)
The cooker hood is more effective when installed in the extraction mode (ducted to the outside).
Venting kits may be purchased through your retailer or DIY store or using the enclosed form, and must be evacuated through an outside vent of ø125 (5ins) or ø150mm (6ins).
The ducting used must be manufactured from fire retardent material conforming to the relevant British Standard or DIN
When the cooker hood is ducted to the outside the charcoal filter must be removed.
Fitting the Ducting
ø 150 | ø 125 |
•Fit the ø150mm (6ins) ducting to the spigot on top of the hood body as illustrated.
•When using ø125mm (5ins) ducting fi t item 9 and 10 on to the spigot on the top of the hood body as illustrated.
•For the best performance use the shortest possible run of ducting and we recommend the use of rigid pipe in preference to fl exible hose as this will improve the fl ow of air while reducing turbulence, which causes causes noise and a loss of performance.
•If the room where the cooker hood is to be used contains a fuel burning appliance such as a central heating boiler, then its fl ue must be be of the room sealed or balanced fl ue type.
•If other types of fl ue or appliances are fi tted ensure that there is an adequate supply of air to the room.
•The cooker ducting when fi tted in the evacuation mode must never be connected to central heating fl ues, radiators or water heaters.
Recirculation Mode
The cooker hood is supplied specifi ed for use in the recirculation mode, with the charcoal fi lter fi tted.
9
10
In the recirculation mode contaminated air is passed through the charcoal fi lter to be purifi ed and recirculated into the kitchen through the grille outlets on either side of the chimney.
•Push fi t the air outlet connector item 15 onto onto the air outlet.
•Ensure the activated charcoal fi lter has been fi tted.
15
14
