INSTALLING THE COOKER HOOD
Clearance Height
The cooker hood is designed to be fi tted over a cooking appliance at the clearance heights stated, providing the maximum output of the appliance beneath does not exceed the maximums quoted in the Technical Speci- fi cations.
If the output of the appliance below the cooker hood exceeds the maximum outputs quoted, please refer to the cooker manufacturer’s installation instructions.
A clearance height of 650mm (25 1/2 ”) is required when installed above a
A clearance height of 685mm (27”) is required when installed above a
(30 1/2 ”) when installed above a slot-in gas cooker.
When installed between adjoining wall cabinets, the wall cabinets must not overhang the hob and the distance between the underside of the cabinet and the worktop must be 450mm. If the height of the wall cabinet is less than 450mm, a gap of 50mm must be maintained either side of the hob.
This cooker hood must not be installed above a cooking appliance with a high level grill.
The hood can be installed above these heights but for optimum performance it should be installed at the distances quoted for the appropriate heat source.
This appliance can be used in either extraction mode (ducting) or recycling mode (fi ltering).
The hood is supplied suitable for recirculation with the charcoal fi lters fi tted.
When used in the extraction mode (ducting) the charcoal filters are not required and must be removed and destroyed.
Hob
A: | 650mm clearance |
B: | 700mm clearance |
C: | 685mm clearance |
D: | 787mm clearance |
12
