Synthetic Paper Grease Filter
The filter has saturation indicators, which are small squares made from a series of dots. When the white paper inside the squares becomes saturated with grease the coloured dots start to run and spread across the paper, indicating that the filter has reached saturation point and must be replaced.
The synthetic paper grease filter cannot be cleaned.
It must not be washed.
To Replace the Synthetic Paper Grease Filter
1.Open the glass visor.
2.Press inwardly on the two slide catches and the grille will open from the front.
3.Slide the right edge of the grille forward until it clears the guide and then unhook the left hinge pin.
4.Carefully ease out the metal wire retaining clips.
5.Clean the metal grille and clips before replacing the filter.
Handle the wire clips with care and keep away from children as they have sharp points.
This appliance can be a fire hazard if the grease and charcoal filters are not cleaned and replaced as recommended.
Changing the Light Bulb
If a lamp fails to function check that the bulb is screwed into the holder.
If bulb failure has occurred then it should be replaced with a
7
