Zanussi ZKF641 Important Safety Requirements, Disposal, Installation into the kitchen worktop

Please examine the appliance for any damage. If the appliance is damaged contact your retailer before the appliance is connected.

Please keep packaging away from children and dispose of with due regard for the environment.

Important Safety Requirements

•The hob must be installed by a qualified electrician / competent person.

•Damaged hobs with cracks or breakages in the ceramic glass must not be connected to the electrical supply.

•This hob must be installed in accordance with the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes of Practice: B.S.6172 / B.S.5440 Part 2 and B.S.6891 Current Editions.

Disposal

All packaging parts are recyclable, wooden strips are non-treated, foils and hard foam are marked. Packaging materials and old appliance should be disposed of at authorised disposal sites.

Installation into the kitchen worktop

Protection against accidental contact according to the regulations set by VDE or other local authorities and EN60335 must be ensured by the correct installation of the appliance. The same refers to the back of the appliance which, even in the case of built-in solutions away from the wall, must not be freely accessible.

Built-in cupboards have to be located and fastened so that they are stable.

	Measurement of:
Worktop Opening		Appliance:
Width:	560mm	Width:	572mm
Depth:	490mm	Depth:	502mm
Corner Radius:5mm		Height:	49mm
Voltage:		AC 230 V 50 Hz/60Hz
Total Connection Load: 5.8 kW

12