Operating instructions
General information
The cooking surface is made of proven ceramic glass. and consists of 4 cooking zones. The rapid glowing cooking zones with that the especially efficient radiant heating elements will considerably reduce the duration of
The cooking surface is
When switching on a cooking zone you may hear a short buzz. That is a characteristic of all ceramic glass cooking zones and does not impair the func- tion or the lifetime of the appliance.
Always put pots and pans onto the cooking zone 
before switching on.
TOUCH-CONTROL sensor fields
DTo operate the
put your finger flat from top onto the desired field, until corresponding indicators will come on or go out, respectively until the desired function will be carried out.
Switching on the appliance
The entire appliance is switched on by means of the
touch control 
ON/OFF.
D Keep the control ON/OFF touched for about two seconds.
The digital indicators show 
and the digital point flashes.
Once the appliance has been switched on, a coo- king zone must be selected within 10 seconds with use of the cooking zone selector. If a cooking zone is not selected the appliance will switch off for safety reasons.
Switching off the appliance
To fully switch off the appliance use the touch control
ON/OFF.
D Keep the sensor field ON/OFF touched for about two seconds.
After switching off of one individual cooking zone or of the entire cooking area, the residual heat is
indicated with 
(“hot”) in the digital indicators of the corresponding cooking zones.
8
