JVC BM-H1900SU manual AFC switching of time constant for the AFC, Ntsc Setup Ntsc set-up level

ON-SCREEN MENU CONTROLS (continued)

PEAKING FREQ./PEAKING LEVEL (picture quality improvement)

Corrects the luminance signal to improve picture quality by changing peak frequency and/or peak level depending on the video signal input to the monitor. Use PEAKING FREQ. to set correction frequency. Use PEAKING LEVEL to set correction level.

Setting (ferquency)	Function
2.6 MHz	For composite video signal or Y/C signal.
5.0 MHz	For component video signal.
Setting (level)	Function
0 dB to +9 dBs	Set a higher level for correction to a higher degree.

NOTE

●When analog RGB signals are input to the monitor, the indications do not appear and the functions cannot be operated.

AFC (switching of time constant for the AFC)

Use to set the time constant for the AFC (auto fine-frequency control) to correct skew distortion of video signals input via a videotape recorder or other video equipment.

Setting	Function
NORMAL	Normal-speed correction.
FAST	Faster correction.
SLOW	Slower correction.

COLOR TEMP. (color temperature switching)

Use to set the color temperature of white balance.

Setting	Function
9300	To 9300K.
6500	To 6500K.

NTSC SETUP (NTSC set-up level)

Use to set up the luminance signal level to match the configuration of the video signal input to the monitor.

Setting	Function
0	For video signal with 0% luminance signal.
7.5	For video signal with 7.5% luminance signal.

COMPO. LEVEL (chrominance level setting)

Use to set the chrominance level of a component video signal.

Setting	Function
SMPTE	For component video signal input via an M	videotape recorder.
BETA00	For component video signal input (set-up level:0%) via a
	BETACAM videotape recorder.
BETA75	For component video signal input (set-up level:7.5%) via a
	BETACAM videotape recorder.

NOTE

●By changing the default setting of white balance adjustment under the SET-UP MENU display (see page 15 for adjustment), the ✻ indication is added to the right of the setting to indicate that the factory-preset setting was changed.

ASPECT	RAT I O		qMENU r
			:4-3
F I LTER	SELECT :COMB
PEAK I NG		FREQ. :2.6MHZ
PEAK I NG		LEVEL:0dB
AFC	TEMP.		:NORMAL
COLOR			:6500
NTSC	SETUP		:7.5
COMPO. LEVEL			:BETA75
qMEMORY MODE r
RGB / COMPO(SDI)			:RGB
ENTER			:

NOTE

●The item and setting are indicated on screen and the function can be operated only when a video signal of the NTSC system is input to the monitor.

NOTE

●The item and setting are indicated on screen and the function can be operated only when a component video signal is input to the monitor.

11