IBM B73.3 manual OneWorld Setup Options Screen

• Authorization Code

To continue with your installation, you will need to obtain an authorization code. You must call J.D. Edwards at 303-334-4000 (ask for Contracts). You will need to provide your J.D. Edwards’ Address Book number and the serial number that appears on the screen, the expiration data, and the number of licenses.

Note: You may be instructed to leave a telephone number and someone from contracts will give you a call back. It is important that you have a telephone near the deployment server you’re about to set up.

5.The contracts’ representative will give you an authorization code while on the telephone. You will enter this code into the Authorization Code field and click Next. You will see a screen similar to Figure 44.

Figure 44. OneWorld Setup Options Screen

6.In the components area, we performed the following steps for our example:

•Click Change Directory and enter D:\ONEWORLD\B733 as the path.

7.For this example, the following components were selected:

•OneWorld

•Production Path Code

•CRP Path Code

Note: Only the CRP (Conference Room Pilot) and the Production Path Code will be installed for this example. However, this should be changed, depending on your client or customer specifications.

8.Click Next to continue.

9.The program now installs the ODBC Access 7.0 drivers and begins copying its file to the deployment server. After the files have completed loading, you will see a screen similar to Figure 45 on page 111.

110J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server