C
Figure 284. Custom Installation Plan (Select Environments) Screen
33.On Select Environments, choose the next environment that you want to define.
34.Repeat all of the previous steps that were done above to configure the data sources and environment.
35.After defining all of your environments, click Close.
36.OneWorld will now ask if you would like to add another location, click No.
A message will appear stating that the plan has been finalized.
Note: When the plan is finalized, the status is set to 20. This means that several changes have been made to the OCM mappings and tables according to the plan that you defined.
37.Click OK and continue. You will see a screen similar to Figure 285 on page 306.
