240 J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server
Note: The capability type H (Host) and P (Paper) are required to set up a
physical printer. However, T (Type) and W (Where) are for informational
purposes only and may be optional.
• Capability = This step is determined by the capability type. For example:
Paper represents LETTER, A4, and LEGAL, while Host represents the
name of the machine that process the job.
4. Click OK.
5. Repeat the same procedure above for P (Paper) and if necessary, for T (Type)
and W (Where).
6. Once you have finished defining the printer capabilities, click Cancel to
continue.
8.5.3 Defining a Conversion Program
This task is not necessary for Intel-based servers. For the Intel-based server,
Adobe Acrobat Reader acts as the conversion program.
8.5.4 Adding a Logical Printer
In this section, we added a printer to our environment. Complete the following
steps:
1. On the Printers (GH9013), choose Work with Logical Printers (P98616).
2. On Work With Logical Printers, click Add. You will see a screen similar to
Figure 195:
Figure 195. Work With Logical Printers (Logical Printer Revisions ) Sc reen
3. Complete the following fields for Logical Printer Revisions: