3.In the [DB SYSTEM SETTING] section, set the Default PathCode parameter to the valid path code you want to be the default (this should match the environment).

4.For the parameter Last User =, remove JDE from this parameter and leave it blank.

5.Save the file, then close it.

9.11.4Installing OneWorld Client (Interactive Mode)

Install the OneWorld Client software on the designated workstation using

Interactive Mode. Ensure no other services or open programs are active.

Note: Refer to your Windows Terminal Server Installation Guide for MDAC releases supported prior to loading the clients.

To begin, complete the following steps:

1.From the Windows Explorer, connect to the OneWorld shared drive of the deployment server.

2.In the Client directory, double-click setup.exe to run it.

Figure 300. OneWorld Client Install Screen

3.Read the licensing terms and click Continue. You will see a screen similar to Figure 301.

The OneWorld installation process verifies that several of the system .DLLs are current. If they are not current, you will receive a message to reboot your system. When you reboot, the system updates the .DLLs in your Windows directories. To install OneWorld, you must begin again with the first step in this task.

Implementing Windows NT Terminal Server Edition 319

Page 331
Image 331
IBM B73.3 manual Installing OneWorld Client Interactive Mode