Change JDBOCI73.DLL to JDBOCI80.DLL.

For B733 - Server Map, put a check mark in the OCM Data Source check box.

19.Click OK and then click Next if you are setting up another data source.

20.If you are finished setting up the data source, then click Cancel to continue.

21.OneWorld prompts if you want to add another enterprise server. For this example, click NO. You will see a screen similar to Figure 57 on page 123.

Figure 56. Machine/Server Types Screen

22.Check the appropriate box for other Machine/Server Types. If none of the servers is selected, then turn off these options. In our example, none of the items was selected. Click OK. You will see a screen similar to Figure 57 on page 123.

If any of the above are chosen, then refer to J.D. Edwards’ OneWorld

Installation Guide (Windows NT - Based Systems), Release B73.3 guide.

Note: For WTS (Windows Terminal Server), refer to Chapter 9, “Implementing

Windows NT Terminal Server Edition” on page 251.

122J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server

Page 134
Image 134
IBM B73.3 manual Windows NT Terminal Server Edition on