8.4 Installing OneWorld on the Enterprise Server

In this section, you will use the CD-ROM software OneWorld Release B73.3 NT Intel, 1 of 1 to install OneWorld on the enterprise server. This installation process copies OneWorld system and path code files directly from the CD-ROM to the enterprise server.

Complete the following steps to install the enterprise server software:

1.Log on to the enterprise server with system administrator privileges.

2.Create a new user JDE with a password JDE; log off and log on using the JDE user ID.

Note: If your deployment and enterprise server are set up as a PDC or PBC, respectively, then you will not need to create JDE user.

3.From your enterprise server, map a drive to the deployment server where the OneWorld base directory resides (d:\OneWorld\B733). For our example, we used x:\.

4.Review the JDE.INI file that will be copied to the enterprise server. By default it is located in deployment server:

ONEWORLD\B733\HOSTS\INTELNT\enterpriseserver

For our example, we used ONEWORLD\B733\HOSTS\INTELNT\IIBM5500ES.

5.Edit the JDE.INI file if necessary to match the following statements:

In the [SECURITY] section, verify that the DefaultEnvironment setting matches a valid environment that you defined in our plan.

In the [INSTALL] section, verify the LocalCodeSet parameter is set to the appropriate value for our installation.

In the [DB SYSTEM SETTINGS], verify that the server name parameters are set as the machine name. Normally, this is set automatically.

6.Save and Close the file.

7.Insert the CD-ROM labeled Release B73.3, NT Intel 1 of 1 into the CD-ROM drive. Setup will start automatically. You will see a screen similar to Figure 188 on page 233.

232J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server

Page 244
Image 244
IBM manual 232 J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server