
At this point, ensure that you have the retail version of Windows NT Server 4.0 available. Click on the > button to proceed with the installation.
7.The Installed Adapters screen is displayed. This screen shows the server type, the hard disk adapters and controllers, and the network adapters and controllers installed in the server, as detected by the ServerGuide. Click on the > button to continue with the installation.
8.Select FAT as the type of partition to be created. Make your Windows NT Server partition size 2 GB. Click the > button to proceed with the installation.
9.Select 5 concurrent connections (or whatever the correct number of connections should be entered). Click the > button twice to proceed with the installation.
10.Remove the SoftwareGuide CD from the
11.After the files are copied to your server, you will see a dialog box indicating to remove the Windows NT Server 4.0 CD from the drive. Click OK to continue. Your system will begin to restart.
Notes
Use the following notes for a successful installation of your Deployment server and Enterprise server.
1.Refer to your Windows NT Server documentation for setup and configuration instructions.
2.When your server reboots, if you see a Virus Warning Screen, ensure the highlighted line states Change is expected and press Enter.
3.Although the setup Microsoft Internet Information Server is a requirement for the Deployment server, do not select it during the Windows NT Server 4.0 installation.
4.During our installation, we selected TCP/IP and NetBIOS as our protocols.
5.A MSDOS window will appear running setup.exe, press Enter twice to continue.
6.Create your repair disk.
7.Once your Windows NT Server 4.0 is up and running, remember to partition, format and assign drive letters for the remaining hard drive(s).
6.3.2Operating System FixPaks CD-ROM
This
Using ServerGuide for IBM Netfinity 85