OneWorld Enterprise server in LAN environments where a significant number of users require a large amount of server resources.
With the addition of the Netfinity 7000 M10 models to the Netfinity family, even greater intensive CPU requirements and larger databases can be accommodated, meeting the processing power and robustness of even the most demanding and complex business-critical environments in today’s highly complex and intensive business markets.
The Netfinity 7000 M10 advances Intel-based network computing to new levels of performance with an architecture that consists of a 64-bit, 100 MHz CPU backplane that supports four 500 MHz Pentium III Xeon processors, a 100 MHz memory controller, and two 16-bit, 100 MHz F-16 buses. The four-way SMP capable Netfinity 7000 M10 delivers impressive TPC-D, SpecWeb on Windows NT, and J.D. Edwards benchmarks that are prove it can handle the e-business or advanced application server environments in your enterprise.
Potential customers seeking a reliable foundation to confidently run your networked mission-critical J.D. Edwards’ enterprise applications may have the following requirements:
•High-performing 500 MHz Pentium III Xeon processors optimized for server applications with:
•512 KB ECC L2 cache
•1 MB ECC L2 cache
•2 MB ECC L2 cache
•High-speed (50 ns) interleaved, ECC memory - up to 8 GB capacity
•Dual, high-speed system buses supporting high-speed Ethernet, ATM, and FDDI topologies and ServeRAID 3H/3L, SSA, or Fibre Channel disk subsystems
•Five 64-bit and seven 32-bit PCI adapter slots
•Integrated Netfinity Advanced Systems Management PCI Adapter with Ethernet port providing a dedicated processor to perform advanced remote management and monitoring functions
•Twelve full-length PCI slots supporting multiple adapters and allowing for adapter redundancy
•Horizontal orientation fits the rack drawer or can be converted to tower installations with device bays remaining in a convenient horizontal position
•Six total drive bays - all allowing access to removable media
•Four 3.5-inch slim-high or two half-high, hot-swap drive bays
•One 5.25/3.5-inch half-high device bay with 32X/14X CD-ROM
•One 3.5-inch slim-high drive bay with 1.44 MB diskette drive
•Internal support for high-performance 4.51 GB, 9.1 GB, and 18.2 GB, 10K Wide Ultra SCSI HDDs, or 7200 rpm drives up to 36.4 GB each
•Terabytes of data storage capacity through attachment of external Netfinity EXP storage units using 36.4 GB HDDs
•An excellent selection of devices tested and supported with the Netfinity 7000 M10 such as the 35/70 GB External DLT Tape Drive or Magstar Tape Libraries
