JVC BM-H1900SU, BM-H1310SU manual Memory Mode, Variable setting range

MEMORY MODE (continued)

3. Press the ▲ or ▼ button to select a function to be revised.

Press the ENTER button after selecting PICTURE ADJUSTMENT to call up display 2.

After making all settings on screen, press the MENU button to make display

1appear.

4.Press the or button to change the set level.

Adjustable CONTRAST, BRIGHT, CHROMA or PHASE range depends on each set level previously stored in memory. MAX appears to indicate maximum level that cannot be increased. MIN appears to indicate minimum level that cannot be decreased.

●Variable setting range

Function		Variable setting range				Default set level
	CONTRAST			-20 to +20		0
PICTURE
	BRIGHT			-20 to +20		0
ADJUST-
	CHROMA			-20 to +20		0
MENT
	PHASE			-20 to +20		0
ASPECT RATIO		4:3	16:9			4:3
FILTER SELECT		COMB		BOTH	NOTCH	COMB
PEAKING FREQ.		2.6MHz		5.0MHz		2.6MHz
PEAKING LEVEL		0dB + 1dB · · · + 9dB				0dB
AFC		NORMAL		FAST	SLOW	NORMAL
COLOR TEMP		9300	6500			6500
NTSC SET UP		0	7.5			7.5
COMPO. LEVEL		SMPTE		BETA00	BETA75	BETA75

qMEMORY MODE REV I SE

CONTRAST	:0
BR I GHT	:0
CHROMA	:0
PHASE	:0
ENTER	:

2

NOTE

●If the ENTER button is pressed after a function other than PICTURE ADJUSTMENT is selected, the on- screen display changes into a single-line one. To select another function after making a change in function, press the MENU button to restore display 1.

5. With display 1 on screen, press the MENU button to make display 3

appear.

●Press the ENTER button to program. ●Press the or button to cancel.

qMEMORY MODE REVISE

Are you sure ?

gYes hthenENTER

gNo h then or

3

13