PICTURE ADJUSTMENTS
Turn a separate front panel control to adjust picture contrast, picture brightness, picture color density, and picture hue respectively:
CONTRAST (picture contrast)
CONTRAST
Softer 
Clearer
BRIGHT (picture brightness)
BRIGHT
Darker 
Brighter
CHROMA (picture color density)
CHROMA
Thinner 
Denser
PHASE (picture hue)
PHASE
NOTE
●To adjust the CHROMA and PHASE controls more precisely, input the color bar signal and operate the BLUE CHECK function as follows:
After inputting the color bar signal, push the front panel BLUE CHECK switch to display a monochrome blue picture without red/green signal components. Turn the CHROMA and PHASE controls so that all (four, in the example below) blue bars have the same density and brightness.
Purplish 
Greenish
Relation between picture adjustments and input video signals
Each picture adjustment is effective for the following video signal input:
Blue | Black | Blue |
Black
Blue | Black | Blue |
Signal |
|
| Composite video, Y/C |
| RGB | COMPONENT | |
Control |
| NTSC | PAL | NTSC 4.43 | B/W | ||
|
|
| |||||
PHASE | Yes | No | Yes | No | No | No | |
CHROMA | Yes | Yes | Yes | No | No | Yes | |
BRIGHT | Yes | Yes | Yes | Yes | Yes | Yes | |
CONTRAST | Yes | Yes | Yes | Yes | Yes | Yes | |
|
|
|
|
|
|
|
|
8
