SET-UP for Monitor Installation | JVC BM-H1310SU, BM-H1900SU

SET-UP FOR MONITOR INSTALLATION

When installing the monitor, make set-up adjustments required for the picture set- tings to match conditions where the monitor is to be used.

To call up SET-UP MENU and select a function:

1. To make 1 (SET-UP MENU) appear, with the ENTER button pressed, press the MENU button.

2. Press the ▲ or ▼ button to select an adjustment item.

(To set STATUS DISPLAY or CONTROL LOCK, steps 3 and 4 are not necessary.)

3. Press the ENTER button to call up the adjustment menu 2 of a selected item (e.g. WHITE BALANCE).

4. Press the ▲ or ▼ button to select a function to be adjusted.

5. Press the or button to change the setting.

6. With the display 1 on screen, press the ▲ or ▼ button to select another function and repeat step 5.

7. Press the MENU button to complete. SET-UP MENU disappears. To make 1 (SET-UP MENU) disappear:

Press the MENU button.

To make 2 (e.g. WHITE BALANCE) disappear:

Press the MENU button twice.

qSET-UP MENU r

S I ZE / CENTER I NG

WH I TE BALANCE AD JUST

REMOTE	SELECT
STATUS D I SPLAY : ON
CONTROL	LOCK : OFF
ENTER	:

1

qWHITE BALANCE r
RED DRIVE	:0
GREEN DRIVE	:0
BLUE DRIVE	:0
RED CUTOFF	:0
GREEN CUTOFF	:0
BLUE CUTOFF	:0
ENTER	:

2

NOTE

●Each time the MENU button is pressed, the previous menu is restored.

SIZE/CENTERING (size/positioning adjustments of RGB signal pictures)

NOTE

For analog RGB video signal pictures, horizontal size, vertical size, horizontal positioning and vertical positioning can be finely adjusted.

	Adjustment		Function
	H.POSITION (-10,-9…0…+9, +10)	+ moves the picture to right.
		-	moves the picture to left.

	V.POSITION (-10,-9…0…+9, +10)	+ moves the picture down.
		-	moves the picture up.

	H.SIZE (-10,-9…0…+9, +10)	+ makes the picture wider.
		-	makes the picture narrower.

	V.SIZE (-10,-9…0…+9, +10)	+ makes the picture higher.
		-	makes the picture lower.

●SIZE/CENTERING appears and the function is operable only when monitoring the picture of analog RGB video signals.

14

Image 14

JVC BM-H1310SU, BM-H1900SU manual SET-UP for Monitor Installation, To call up SET-UP Menu and select a function

Contents

BM-H1310SU Safety Precautions Information Contents Features Controls and Features Front Terminals and Features Rear External/internal synchronization RGB/COMPOSDI terminal settingConnection Example Basic Operation To demagnetize the picture tube Contrast picture contrast Picture AdjustmentsPhase picture hue Bright picture brightness Video Signal Controls Push each switch to on or OFF for video signal control Filter Select built-in filter selection Aspect Ratio picture aspect ratio switchingCalling up the menu display, selecting an item Ntsc Setup Ntsc set-up level AFC switching of time constant for the AFCColor TEMP. color temperature switching COMPO. Level chrominance level setting Revision of memory mode Memory Mode Variable setting range SET-UP for Monitor Installation To call up SET-UP Menu and select a function CNTL-1/CNTL-2 setting indications and set positions Remote Select TALLY/REMOTE-terminal settingsInput setting indications and selected inputs TALLY/REMOTE terminal functions SET-UP for Monitor Installation Status Display setting the status display to on/off To initialize both MENU/SET-UP Menu settings Picture Setting InitializationTo initialize Menu settings only Sound adjustments Remote ControlsPicture adjustments On-screen menu remote operation To call up an ID number use remote unit To assign a monitor use remote controlTo program an ID number use front controls Before Calling for Service Menu Display Chart ¥ + Menu Specifications RGB / Compo SDI Dimensions BM-H1900SU / BM-H1310SU Color Video Monitor