Copying

D Press the {Start} key.

2

Note

To stop the machine during a multi-copy run, press the {Clear/Stop} key.

If you want to change the settings, press the [Yes] key. If you want to re- sume the copy run, press the [Resume] key.

To return the machine to the initial condition after copying, press the {Clear Modes} key.

Adjusting Copy Image Density

Image density affects the contrast of copies. With these functions you can control the image density so that copies match originals. Make the selection you require, and then place your originals and press the {Start} key.

Auto image density

The machine automatically controls the image density.

Note

Auto Image Density and Auto Color Select cannot be set together.

A If Auto Color Select mode is selected, select another color mode to cancel it.

P.30 “Selecting a Color Mode”.

B Press the [Auto Image Density] key.

28

Page 44
Image 44
Lanier 5813 manual Adjusting Copy Image Density, Auto image density, Press the Auto Image Density key