Lanier 5813 manual Repeat Image, 109, Press the Mirror Image key

Image Creation

B Press the [Mirror Image] key.

2

C Place your originals, and then press the {Start} key.

Repeat Image

This function copies a part of the original image repeatedly.

Note

❒When this function is used, the leading edge margin of 10mm, 0.4" is set on the copy paper.

❒There are three ways to specify the image of the original to be repeated as follows:

•D.Size Mag.(inch):

This function allows you to reproduce the top band of an original repeat- edly down the entire copy. You specify the width of the band (the vertical length of image) and it is repeated as many times as will fit on the copy.

•Number of Images:

This function also allows you to reproduce the top band of an original repeat- edly down the entire copy, but here you specify the number of image repeti- tions you want and the copier will determine the width of the top band.

•Editor Area:

This function allows you to select an area of the original and reproduce it repeatedly down the copy. The repetitions are made one below the other, and are all aligned to the right.

109