Lanier 5813 manual Selecting Modes for Designated Areas, 165

Selecting Modes for Designated Areas

Selecting Modes for Designated Areas

Reference

The available modes for area editing depend on the area shape. ⇒ P.182 “Combination Chart for Area Editing”.

For functions that cannot be used together in area editing, ⇒ P.182 “Combina- tion Chart for Area Editing”.

More than one mode can be set for a designated area, however, there are some limitations, ⇒ P.182 “Combination Chart for Area Editing”. And up to 7 patterns of modes can be set together.

Note

❒Up to 20 groups of multiple areas can be edited. All the areas should belong to groups 1 - 20. You can select up to seven job patterns for at most 20 groups. After you have set seven patterns, the copier will only allow you to choose the

pattern of a previous group. If you change the settings for one group, it will	5
change the settings for all other groups with the same job pattern. However,

if you have set a Paint, Color Background, or Frame/ Line, changing the color in one group will not affect other groups. (Up to 15 colors can be selected.)

❒The modes that can be set for inside areas are as follows:

•Color/Image Adjustment: Image Density, Color Mode, Original Type, Im- age Adjustment, Color Adjustment, Color Balance Adjustment

•Color Creation: Color Conversion, Color Erase, Color Background, Paint, Type Mask

•Image Creation: Outline Image, Shadow Image, Slanted Image, Mirror Im- age, Positive/Negative

Note

❒The editing functions are available when specifying area with Frame/Line mode are Width and Color.

❒Color/Image Adjustment's default setting:

•Image Density - Manual Image Density

•Color Mode - Black

•Original Type - Text

❒You can change the default settings. ⇒ P.211 “User Tools”.

❒Depending on the shapes of the areas, coloring or deleting near the outlines of the areas might not do well, or the outlines might become uneven.

165