Lanier 5813 manual System settings, 213

User Tools

Setting You can Change with the User Tools (System Settings)

Reference

For details about how to access the user tools, ⇒ P.211 “Accessing the User Tools”.

System settings

Menu	Description
Function Priority	You can specify the mode to be displayed immediately after the opera-
	tion switch is turned on or System Reset Timer mode is turned on.

	Note
	❒ Default: Copier
Panel Tone	A tone sounds when a key is pressed. This beeper can be turned on or
	off.

	Note
	❒ Default: On
Ready / Tone	Choose whether the machine beeps when it becomes ready for a copy
	run after power up.

	Note
	❒ Default: On
	❒ When the “Panel Tone” is set to Off, the beeper does not sound even
	if the “Ready/Tone” is set to On.
Auto Timer	The machine turns itself off automatically to conserve energy after your
	job is finished, after the selected time. This function is called “Auto
	Off”. The time can be set from 1 to 240 minutes.

	Note
	❒ Default: 90 minutes
Energy Saver Level	The machine enters Low Power mode automatically a certain time after
	your job is finished. You can set this time between 1 and 240 times.

	Note
	❒ Default: 15 minutes
Control Panel Off	The machine enters Energy Saver mode automatically after your job is
Timer	finished, after the selected time. The time can be set from 10 to 990 sec-
	onds (in 10 seconds steps), or off. In Energy Saver mode, the panel dis-
	play turns off.

Note

❒Default: On (60 seconds)

7

213